|
|
| NEW! Built-In Image Processing – Now Available in the AVM 50 |
Why a Built-In Image Processor?
At Anthem, we believe that image processing (video scaling) is far more effective and efficient when executed inside the digital audio/video processor, as opposed to through an external image processor:
|
• |
Image processing inside the SSP enables processing of as many sources as the preamplifier can accommodate. |
|
• |
Convenience! With video signals processed in the SSP, audio and video do not have to be switched separately as the user switches from source to source. |
|
• |
Video processing can be “tweaked” separately and accordingly for each source. |
|
• |
With video and audio processing together in one unit, HDMI™ switching time is minimized. |
|
• |
External processors cannot accommodate playing DVD-A through HDMI™. |
|
• |
Anthem™ software upgrades can be incorporated over time to enhance connectivity. |
Complete details on the AVM 50's Built-in Broadcast-Quality Digital Image Processing |
| PREAMPLIFIER SECTION |
| Input Impedance |
20 k ohms
|
Output Impedance
Main-RCA
Other-RCA
XLR |
300 ohms
51 ohms
600 ohms
|
| Rated Input |
2.0 Vrms
|
Maximum Input
6-Channel S/E
All Others |
3.0 Vrms
5.3 Vrms
|
| Rated Output (100k ohms load) |
2.0 Vrms
|
| Minimum Load |
5k ohms
|
Maximum Output
RCA
XLR |
6.3 Vrms
12.6 Vrms
|
| Headphone Output |
100 mW into 32 ohms @ 0.2% THD+N
|
Volume Range
Main
Zone 2/3 & Headphone |
-95.5 dB to +31.5 dB (0.5 dB resolution)
-62.5 dB to +10.0 dB (1.25 dB resolution)
|
Bass Management
High-Pass Slope (Small Speaker Setting)
Low-Pass Slope (Subwoofer)
Crossover Frequency (Adjustable in 5 Hz Increments) |
12 dB/octave (2nd order)
24 dB/octave (4th order)
25-160 Hz
|
Tone Control
Bass Turnover Frequency
Treble Turnover Frequency
Range
Filter Response Type |
200 Hz
2 kHz
+/- 12 dB
Shelf
|
| Channel Separation (at 1 kHz) |
82 dB
|
| Crosstalk Between Inputs (at 1 kHz) |
86 dB
|
MAIN PATH
(RCA & XLR Outputs, 48 kHz Sampling Rate for all Digital Signal Paths) |
Frequency Response and Bandwidth
6-Ch S/E and 2-Ch BAL Direct Inputs
2-Ch S/E Direct Inputs
Analog-DSP Inputs @ 24/96
Digital Inputs @ 24/96 |
10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 130 kHz -3 dB
10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 120 kHz -3 dB
10 Hz to 20 kHz +0, -0.3 dB; 1 Hz to 37 kHz -3 dB
10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 39 kHz -3 dB
|
THD+N (at Rated Input & Output)
6-Ch S/E Direct Input
2-Ch BAL Direct Input
2-Ch S/E Direct Inputs
Analog-DSP Inputs @ 24/48
Digital Inputs @ 24/48 |
0.003% (80 kHz BW)
0.004% (80 kHz BW)
0.006% (80 kHz BW)
0.006% (AES17 filter)
0.004% (AES17 filter)
|
IMD (CCIF @ 15 kHz & 16 kHz)
6-Ch S/E Direct Input
2-Ch BAL Direct Input
2-Ch S/E Direct Input
Analog-DSP Inputs @ 24/48
Digital Inputs @ 24/96 |
0.001%
0.002%
0.003%
0.003%
0.001%
|
S/N Ratio (ref. 2.0 Vrms A-weighted)
6-Ch S/E Direct Input
2-Ch Direct Inputs
Analog-DSP Inputs @ 24/48
Digital Inputs @ 24/96 |
107 dB
106 dB
100 dB
104 dB
|
| XLR Pin Configuration |
Pin 1: Ground, Pin 2: Positive, Pin 3: Negative
|
| ZONE 2 and ZONE 3 PATHS |
Frequency Response and Bandwidth
THD+N (at Rated Input & Output)
IMD (CCIF at 15 kHz & 16 kHz)
S/N Ratio (ref. 2.0 Vrms A-weighted) |
20 Hz to 20 kHz +0, -0.1 dB; 3 Hz to 140 kHz -3 dB
0.06% (80 kHz BW)
0.06%
97 dB
|
RECORD PATH Analog to Digital Conversion S/N Ratio
(A-weighted) |
100 dB
|
| FM TUNER SECTION |
Sensitivity
50 dB S/N
IHF |
13 dBµ typ., 25 dBµ max.
10 dBµ typ., 20 dBµ max.
|
S/N Ratio
Mono
Stereo |
75 dB typ., 65 dB min.
69 dB typ., 60 dB min.
|
Distortion
Mono
Stereo |
0.2% typ., 1.0% max.
0.3% typ., 1.5% max.
|
| Stereo Separation |
40 dB typ., 25 dB min.
|
Adjacent Channel Selectivity
(+/- 400 kHz) |
70 dB typ., 60 dB min.
|
| Frequency Response |
25 Hz to 15 kHz +0. -2 dB
|
| AM TUNER SECTION |
| Sensitivity (20 dB S/N) |
49 dBµ typ., 56 dBµ max.
|
| S/N Ratio |
50 dB typ., 43 dB min.
|
| Distortion |
0.7% typ., 2.0% max.
|
| One-Signal Selectivity (+/- 10 kHz) |
24 dB typ., 18 dB min.
|
| VIDEO SECTION |
Bandwidth
Composite & S-Video
Component: Green
Component: Red
Component: Blue |
6 MHz -0.02 dB; 70 MHz -3 dB
110 MHz -3 dB
90 MHz -3 dB
80 MHz -3 dB
|
All video inputs and outputs are 75 ohms, 1.5 Vp-p. Component inputs and outputs work with any Standard requiring ultra-wide bandwidth (1080 p compatible), including Component-RGB, HDTV, line doublers, quadruplers, and scalers.
|
| HDMI™ – AVM 40 & AVM 50 ONLY |
Four HDMI™ inputs for digital video, digital audio, and multichannel high-resolution audio.
|
DIGITAL AUDIO
All digital audio inputs and outputs are to S/PDIF electrical (75 ohm, 0.5 Vp-p), S/PDIF optical (Toslink), or AES / EBU (110 ohms, 5 Vp-p) standards as appropriate.
|
| Processor |
FreeScale™ DSP 56367 150 MHz
|
Audio Converters
Analog to Digital
Digital to Analog |
AKM® AK5383 up to 24-bit/96 kHz
AKM® AK4382 up to 24-bit/192 kHz
|
| CONTROL |
Infra Red
Carrier Frequency
Max. 12V Supply Current
Max. Emitter Current |
38 kHz
150 mA
100 mA per output
|
| RS-232 Connection |
DB-9F (straight-wired)
|
| RS-232 Pin Configuration (AVM 30 Side) |
Pin 2: Tx, Pin 3: Rx, Pin 5: Ground
|
| RS-232 Port Configuration |
Baud rate (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200), 8 data bits, 1 stop bit, no parity bits, flow control (RTS, CTS, NONE)
|
Trigger Outputs
Polarity
Max. Current @ 12 VDC
Sequential Delay |
tip positive; sleeve negative
50 mA (Triggers 1,2), 200 mA (Trigger 3)
250 ms
|
| DIMENSIONS |
|
Width
|
17-1/4 inches (43.8 cm)
|
|
Height
|
5-7/8 inches (14.9 cm) including feet; Rack-mounting: 3 rack units, without feet
|
|
Depth
|
14-1/4 inches (36.2 cm)
|
|
Weight
|
|
| MISCELLANEOUS |
| Supply Voltage |
105-130 V, 60 Hz only
|
| Power Consumption |
Maximum 140 VA
|
|
|
|
|
|
|
|
|
