During the unprecedented impact of COVID-19 we have reduced both staff and hours of operation. Because of this, all calls may not be answered. For all technical support related inquires we encourage you to email support@anthemav.com. Please expect a slightly longer response time than usual. Thank you for your understanding during this time.

onMenu
onTab
Nav
Main
Footer
Total
Window

STR Power Amplifier

» STR Series » Power Amplifier

$5,999 each USD 


Specifications

POWER AMPLIFIER
Impedance
Power Output (per channel)
(Continuous, 20 Hz - 20 kHz, <1% THD)
400 W 600 W 800 W*
* Maximum 3 seconds due to high current draw.
THD (400 W) 0.0007% (1 kHz), 0.004% (20 kHz)
IMD (300 W)  
ITU-R (19 kHz + 20 kHz) 0.0006%
SMPTE (60 Hz + 7 kHz) 0.0016%
SNR (IEC-A, ref. 400 W) 121 dB
Frequency Response (20 Hz - 20 kHz) ± 0.1 dB
Power Bandwidth (-3 dB at 400 W into 8 ohms) 91 kHz
Slew Rate 30 V/μs
Damping Factor (20 Hz - 1 kHz) 360
Channel Separation 101 dB (100 Hz), 98 dB (10 kHz)
Input Impedance 10kΩ (RCA), 15kΩ (XLR)
Input Sensitivity (for 400W into 8Ω) 2.1 Vrms
Voltage Gain 29 dB
POWER REQUIREMENT
120 V version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
POWER CONSUMPTION
Standby 310 mW
Idle 65 W
Typical Playback Levels 150 W - 300 W
High Playback Levels 600 W - 1100 W
DIMENSIONS
Height 6-3/4” (17.2 cm)
Width 17” (43.2 cm)
Depth (not including power cord) 18-1/2” (47 cm)
Weight (unpacked) 60 lb (27.3 kg)

Audio/Video
Receivers

Amplifiers



Distribution
Solutions

Integrated
Amplifiers

Monaural
Amplifiers