onMenu
onTab
Nav
Main
Footer
Total
Window

MRX SLM

» MRX Series » A/V Receiver

$1,299.99 each USD 



MRX SLM Specifications

PREAMPLIFIER + AMPLIFIER (8-ohm loads)
Frequency Response 20 Hz - 20 kHz +/- 0.2 dB ch 1-5
THD+N (1W output, 20-20 kHz BW) < 0.005% ch 1-5
S/N Ratio (1 W output, IEC-A filter) SNR: 93 dB ch 1-5
S/N Ratio (max power output, IEC-A filter) SNR: 109 dB ch 1-5
SPEAKER IMPEDANCE
Compatible with 4 Ohms or higher impedance Yes
MAXIMUM CONTINUOUS OUTPUT (1% THD)
Power measurements underway to ensure compliance with new FTC regulations
POWER CONSUMPTION
Typical Load (All Ch 1/8th Power, 8ohm) < 50 W
Standby (IP Control Enabled) < 2 W
Standby (HDMI Bypass Enabled) < 5 W
DIMENSIONS
Height (without feet) 1.5” / 3.8 cm
Height (with feet) 1.7” / 4.3 cm
Height (with rackmount kit) 1U / 1.75” / 4.4 cm
Width 11” / 27.9 cm
Width (with rackmount Kit) 19” / 43.2 cm
Depth 11” / 27.9 cm
Depth (including power cord) 13” / 33.0 cm
WEIGHT
6.6 lb / 3.0 kg
POWER REQUIREMENT
120 V version In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.